• Competitive pay and benefits
• Opportunities for training and advancement
• Supportive team environment
• Stable, growing company

• Manage daily production, equipment setup, and batch processes
• Monitor raw materials for quality
• Assign tasks and coordinate materials through JDE
• Train team members on quality and production procedures
• Complete documentation and perform label/product checks
• Enforce safety rules and proper PPE use
• Coach team members, manage break/shift coverage, and reduce downtime

• Strong multitasking and communication skills
• Experience with material-handling equipment
• Proven leadership abilities
• Comfortable using Outlook and digital tools

• Full-Time, flexible shifts; overtime/weekends as needed
• Monday - Friday 6:00 am to 2:30 pm are core hours
• Indoor manufacturing environment with varying temps/noise
• Physical activity: standing, walking, lifting up to 50 lbs
• No travel required

• High School Diploma or equivalent
• Ability to work varied shifts

• 3+ years manufacturing experience (food production a plus)
• GMP, HACCP, allergen, food defense, wash-down training

1. Inspection of the part before, during, and after processing
2. Competently operates all machinery and instruments necessary to safely perform the job function, including routine maintenance. Fork truck training for designated employees only.
3. Maintain a clean, safe work environment.
4. Able to locate and understand relevant Quality system documentation
5. Understand and perform steps on routers, follow procedures on correctly filling out routers, corrections of input mistakes and notification of superior for all other router related problems.
6. Competently process parts with little or no supervision.
7. Practice behavior which avoids damage to parts and protects the part from damage.

1. High School Diploma or GED
2. Ability to read process traveler and fill out completed operations
3. Ability to perform simple cleaning operations
4. Ability to assist as a helper to trained operators
5. Able to follow verbal and written direction
6. Able to use basic hand tools such as wrenches and clamps
7. Able to lift/move up to 50 lbs.
8. Able to work under direct supervision.

• Set up and operate extrusion machines in accordance with job specifications.
• Monitor machine performance and product quality throughout production runs.
• Use tape measures, calipers, and snap gauges to verify product dimensions and tolerances.
• Adjust machine settings such as temperature, pressure, and speed to ensure consistent output.
• Load raw materials and maintain proper feed during operations.
• Perform quality checks and record production data accurately.
• Assist with changeovers, cleanouts, and routine maintenance.
• Report equipment malfunctions or quality concerns promptly.
• Maintain a clean, safe, and organized work area.
• Adapt quickly to changes in production needs, tasks, or priorities.
• Demonstrate a positive attitude and support team members as needed.
• Follow all safety protocols and use personal protective equipment (PPE) as required.

• High school diploma or equivalent required.
• 1–2 years of experience in extrusion or machine operation preferred.
• Proficient in using tape measures, calipers, and snap gauges.
• Mechanical aptitude and problem-solving ability.
• Strong attention to detail and ability to follow technical instructions.
• Physically able to lift up to 25-50 lbs. hourly, stand, and move throughout the shift.
• Reliable, flexible, adaptable, and capable of working independently.
• Positive attitude and a team-oriented mindset.
• Good verbal and written communication skills.

• Fast-paced manufacturing environment with exposure to heat, noise, and machinery.
• Standing, bending, lifting, and repetitive tasks for extended periods.
• PPE required at all times.
• May include overtime, rotating shifts, and weekend work as production demands.

• Perform visual and mechanical inspections using hand tools, gauges, optical equipment, and CMM
• Conduct GD&T measurements and interpret engineering prints
• Perform wafer inspection and support screen printing quality processes
• Test parts using fine leak tester, hipot, capacitance meter, and related equipment
• Support AS9102 first article inspections and ensure compliance with IPC 610, J-STD, and Mil-883 standards
• Maintain QC documentation, calibration support, shipping verification, and corrective actions
• Utilize Microsoft Excel and Office Suite for reporting and data tracking

• High School diploma or equivalent
• 1+ year of Quality Inspection experience
• Ability to read blueprints and measure machined products accurately
• Experience with inspection tools and precision measurement equipment
• Ability to stand consistently throughout an 8 hour shift

• Weigh, measure, and mix ingredients per batch sheets and SOPs
• Verify ingredients, lot numbers, and expiration dates
• Operate batching and mixing equipment safely
• Perform basic quality checks (pH, temperature, etc.)
• Record production data accurately
• Maintain cleanliness and follow GMP, HACCP, and safety standards
• Communicate issues or deviations to Production and Quality teams
• Monitor inventory and support production as needed

• High school diploma or equivalent
• Experience in food/beverage manufacturing preferred
• Basic math and computer skills
• Strong attention to detail and accuracy
• Ability to work in a fast-paced environment
• Team-oriented with good communication skills

• Ability to lift up to 50 lbs
• Ability to stand, bend, and move throughout shift
• Comfortable working in varying temperatures and production environments

• Perform bench and structural assembly, boxing, and bagging
• Work efficiently in a fast-paced production setting
• Lift and move materials (approx. 5–50 lbs., various sizes/shapes)
• Safely operate production tools and equipment
• Maintain quality, safety, and 5S standards
• Support team initiatives and daily production goals

• Recent manufacturing, assembly, or production experience
• Ability to handle repetitive tasks and physical work throughout the shift
• Strong attention to safety and quality
• Reliable, team-oriented mindset
• Comfortable working in a fast-paced environment

• Perform a variety of mechanical and electro-mechanical assembly operations on assemblies, subassemblies, and end products.
• Conduct RF calibration and testing of equipment including signal generators, oscilloscopes, spectrum analyzers, and power meters.
• Calibrate and maintain temperature and humidity instruments to ensure system accuracy and reliability.
• Utilize microscopes and hand tools (soldering irons, pliers, wrenches, etc.) to assemble and inspect components to precise tolerances.
• Read and interpret mechanical/electrical drawings and Bills of Material (BOMs).
• Troubleshoot and repair RF/Digital circuits to the component level using strong electrical theory knowledge.
• Follow established assembly processes and engineering instructions with a focus on quality and safety.
• Maintain a clean, organized workspace and contribute to continuous improvement initiatives through the L3Harris E3 process.
• Occasionally travel to nearby campuses to perform calibration or testing on equipment that cannot be moved.

• U.S. Citizenship (ability to obtain a Secret Clearance).
• High School Diploma or GED.
• Minimum of 4 years of relevant experience; or an Associate Degree with at least 2 years of experience.
• Strong hand-eye coordination and comfort working under a microscope.
• Solid understanding of electronic theory, analog/digital circuitry, and RF transmission/receiver systems.
• Proficient with test equipment such as signal generators, oscilloscopes, and spectrum analyzers.
• Must have reliable transportation and consistently arrive to work on time.
• Able to lift up to 30 lbs and move across the production floor as needed.
• Team-oriented with a positive attitude and willingness to learn.

• 8+ years of prior relevant experience or an Associate Degree with 4 years of experience.
• Certifications such as J-STD-001 or IPC-610.
• Experience with mechanical or electrical assembly, including soldering.
• Familiarity with Microsoft Office applications.

• Cutting-edge lab environment supporting innovative SAS projects.
• Collaborative, team-based culture with growth and training opportunities.
• 9/80 schedule offering every other Friday off!

• Perform preventative and corrective maintenance on CNC and manufacturing machinery
• Maintain equipment including 5-axis mills, mill turns, EDMs, Laser-Swiss, CNC lathes, motion control systems, and stamping machines
• Troubleshoot mechanical, electrical, and control systems to the component level
• Document repairs and determine root cause of failures
• Partner with engineering to resolve complex equipment issues
• Follow FDA, ISO13485, and ISO9001 quality standards
• Support TPM activities, tank cleanout, and general equipment upkeep

• 5+ years CNC maintenance experience in manufacturing
• Ability to read schematics and work across electrical, mechanical, pneumatic, hydraulic, and ladder logic systems
• Ability to program/operate CNC equipment to verify repairs
• Proficiency with Microsoft Office and maintenance reporting
• Strong problem-solving, organization, and teamwork skills

• Ballbar testing experience
• Experience with Fanuc, Mitsubishi, Heidenhain, and Mazatrol controllers
• PLC and servo drive troubleshooting experience

DUTIES:

• Perform preventative and corrective maintenance on manufacturing machinery
• Maintain and repair a diverse mix of machining equipment such as 5-axis milling machines, mill turns, EDMs, Laser-Swiss, CNC lathes, motion control systems, mist collectors, ovens, stamping machines, etc.
• Troubleshooting mechanical, electrical, and control systems down to the component level. Document work is performed in our maintenance software and determines the root cause for every failure.
• Plan repair worked and determined methods and sequence of operations work closely with engineering to resolve complex problems quickly
• Identify improvements in our preventative maintenance instructions, asset BOMs, machine design changes, and communicate these effectively to engineering management
• Aware of practices and processes utilizing current management tools
• The comment in this position is responsible for knowledge of and adherence to the policies and procedures as they relate to the requirements of FDA quality system regulation, ISO13485 and ISO9001 (current revisions)
• Tank cleanout
• TPM - very light repairs

1. Accurately select products to fulfill customer orders, using a cherry picker or other Powered Industrial Trucks (PIT) as designated.
2. Properly arrange selected products on pallets for easy inspection and verification for order accuracy.
3. Understand and manage required paperwork (e.g., customer orders, vendor stock sheets) to ensure accurate tracking and movement of inventory.
4. Work closely with Warehouse Managers, Material Handlers, Dock Unloaders, and Forklift Operators to ensure proper product handling and transfer when necessary.
5. Ensure the correct flow of product movement within the warehouse, adhering to established operational procedures.
6. Maintain cleanliness and orderliness within the warehouse to ensure a safe and organized environment.
7. Adhere to all safety standards and protocols

1. Ability to pass the Powered Industrial Truck (PIT) Training Certification Course
2. Able to lift up to 40 lbs. repeatedly and perform physical tasks as required.
3. Follow all HIT procedures and policies
4. Recent experience operating cherry pickers, forklifts, and pallet jacks is highly preferred.
5. High school diploma or equivalent preferred
6. Strong attention to detail and accuracy.
7. Basic computer skills with proficiency in inventory management software and Microsoft Office (Excel, Word).
8. Must be able to read and write in English. Bilinguals welcome.

1. Comfortable working in a fast-paced environment with a focus on efficiency and accuracy.
2. Strong verbal and written communication skills for effective collaboration with team members and supervisors.
3. Ability to work overtime as needed to meet operational demands.
4. Solid understanding of safety standards and protocols within a warehouse environment.
5. Capability to work in varying warehouse conditions, including high heat and cold temperatures.

1. Seated or standing for extended periods.
2. Pulling, pushing, bending, and lifting to 40 lbs.
3. Working in high heat and cold temperatures.

• Read and follow blueprints, schematics, and work instructions
• Assemble components using hand tools, power tools, and production equipment
• Perform quality checks to ensure products meet standards
• Maintain accurate documentation of work completed
• Follow all safety guidelines and keep a clean, organized workspace
• Support team production goals and continuous improvement efforts

• Strong manual dexterity and hand-eye coordination
• Ability to interpret technical diagrams and written procedures
• High attention to detail and commitment to quality
• Physical stamina and ability to stand, lift, and perform repetitive tasks
• Manufacturing or assembly experience preferred but not required

• Stable full-time opportunity
• Training provided
• Team-oriented environment
• Growth potential within manufacturing operations

• Perform light assembly and packaging of electro-mechanical and optical assemblies and subassemblies
• Support production goals by following established processes and quality standards
• Assist in identifying and supporting corrective actions related to instruments, assemblies, processes, tooling, and materials
• Participate in process improvement initiatives to enhance manufacturing efficiency
• Assist with reviewing and updating documentation related to assembly processes and equipment
• Perform additional duties as assigned by the department manager

• Experience in a regulated manufacturing environment preferred
• Basic computer skills required
• High school diploma or equivalent preferred
• Strong attention to detail and ability to follow written instructions

• Full-time
• On-site in Milford, MA

1. Rack and un-rack parts, on and off, various alloy fixtures
2. Ensure parts for racking match the parts listed on the Job Order
3. Ensure the count of parts for racking matches the count of parts indicated on the Job Order
4. Properly set up the parts for racking according to the company’s standard operating procedures
5. Ensure proper alloy racks are selected for the coating process indicated on the Job Order
6. Monitor the production schedule to ensure that incoming and outgoing parts are being efficiently processed through the department for on-time delivery to customers
7. Inspect parts while racking, and bringing any part deficiencies to management’s attention
8. Skillfully unpackage parts according to company guidelines
9. Clean surfaces of incoming parts to ensure they are free from ink, oil, dirt, and debris
10. Ensure rack fixtures are clean after each process and ready for the next set of parts   
11. Assist with packaging completed parts securely for shipment and as directed by management
12. Assist with production line assembly processes as directed by management
13. Ensure tooling and workspaces are kept clean and neat
14. Actively participate in production improvement initiatives
15. Complete training as required for production, including forklift training
16. Efficiently perform production duties while working in a safe manner and maintaining company safety standards
17. Maintain organization of racking areas, shipping materials, and workspaces to ensure a clean working environment  
18. Complete other duties as assigned by management 

• Qualifications:
• Prior experience in painting or masking in a production or industrial environment is a plus
• Attention to detail and precision.
• Good hand-eye coordination and manual dexterity.
• Familiarity with safety procedures and PPE usage.
• Attention to detail and precision.
• Good hand-eye coordination and manual dexterity.

• Process parts according to shop work order and applicable specifications and drawings
• Follow instructions from supervisor pertaining to specific instructions or tasks
• Ensure integrity of incoming parts (damage, scratches, etc.)
• Complete work order and all necessary paperwork according to job, drawings and specifications
• Manage hazardous materials safely and in accordance with state and federal regulations
• Perform other duties as required

• Vision (Near, Distance)
• Sense of Sound - Able to hear average conversations
• Sense of Touch
• Ability to wear Personal Protective Equipment (PPE) - Safety Glasses
• Standing for long periods of time
    

• 1st Shift: 6:00 AM – 2:30 PM
• 2nd Shift: 2:30 PM – 11:00 PM
  Pay Rate: $15.00 – $18.00 per hour (based on experience)
  Employment Type: Full-Time

• Inspect parts and evaluate required painting details prior to application
• Select and prepare the correct paint based on shop paperwork, drawings, and technical specifications
• Mix paints according to supplied instructions and Technical Data Sheets (TDS)
• Prepare surfaces by cleaning and performing minor sanding as required
• Apply paint to various surfaces and metals using spray guns or other approved paint methods
• Ensure painted parts meet quality and finish standards
• Manage time effectively to complete assigned tasks within specified production timelines
• Work collaboratively with team members to coordinate workflow and meet production goals

• Mask and shield surfaces of parts that do not require painting or processing
• Process parts according to shop work orders, drawings, and applicable specifications
• Inspect incoming parts for damage, scratches, or defects and report issues as needed
• Follow supervisor instructions and comply with assigned tasks and priorities
• Accurately complete work orders and all required documentation
• Safely handle and manage hazardous materials in compliance with state and federal regulations
• Perform other duties as assigned

• Previous experience in painting, masking, or manufacturing preferred
• Ability to read and follow work orders, drawings, and specifications
• Knowledge of spray painting equipment and surface preparation techniques
• Strong attention to detail and quality
• Ability to work independently and as part of a team
• Dependable, punctual, and safety-conscious

• Ability to stand for extended periods
• Ability to bend, reach, lift, and carry materials as required
• Ability to work in a production or manufacturing environment

• Perform precision mechanical inspections based on dimensioned drawings using tools such as calipers, micrometers, height gages, gage blocks/pins, surface plates, toolmakers microscopes, optical comparators, CMMs, and other standard equipment.
• Conduct visual inspections of electronic assemblies using microscopes and magnifiers.
• Complete First Article Inspections (FAI) and create detailed reports as required.
• Communicate discrepancies verbally and through written reports to Supplier Quality Engineers/Technicians (SQE/SQT).
• Independently perform source inspections at local suppliers.
• Participate in MRB meetings and support SQE/SQT teams when needed.
• Maintain accurate and organized inspection records per company procedures.
• Flag equipment needs and recommend new or custom metrology tools when required.
• Identify Dock-to-Stock (DTS) candidates and present nominations to the SQE team.
• Partner with buyers, planners, design engineers, manufacturing engineers, quality engineers, and program leadership to support ongoing projects.
• Support supplier audits alongside SQE/SQT as necessary.
• Use computers daily to manage files, documentation, and reporting.

• High School Diploma or equivalent and
  • 6+ years of relevant inspection experience or
  • 2-year technical/Associates degree with 2+ years of related experience
• Strong ability to interpret drawings/blueprints
• Hands-on experience with inspection tooling such as gauges, calipers, micrometers

• Experience maintaining records and documents per quality procedures
• IPC-A-610 Certification
• Hexagon CMM certification (PC-DMIS software)
• Keyence Vision System programming experience
• Optical lens inspection experience

• Strong teamwork skills and ability to collaborate with engineers and technicians
• Ability to work independently when needed
• Self-motivated with strong initiative
• Organized, detail-oriented, and reliable

• Interest in career growth and long-term advancement opportunities
• Strong problem-solving and communication abilities

• Must be able to work onsite (no remote option)
• Candidates must show interest in professional growth and advancement

• High School Diploma required
• IPC-A-610 Certification preferred

• Pick, pack, and ship orders accurately using pick lists
• Scan inventory and perform receiving and put-away functions
• Load and unload trucks as needed
• Use handheld scanners and Warehouse Management Systems (WMS)
• Rotate between warehouse positions based on workload
• Meet hourly and daily production quotas
• Follow warehouse safety policies and procedures

• Warehouse, fulfillment, or distribution center experience preferred
• Picker, packer, shipping, or receiving experience a plus
• Basic computer skills and data entry
• Experience using WMS or handheld scanners preferred
• Strong attention to detail and accuracy
• Team-oriented with good communication skills
• Repetitive ladder use
• Standing, walking, bending, and lifting 30–50 lbs throughout shift
• Fast-paced warehouse environment

• High school diploma or GED
• Ability to pass background checks and drug screen
• Reliable transportation and consistent attendance
• Ability to read, speak, and understand English for safety and training
• Stable work history (no more than two jobs in the past 12 months)

• Monday-Friday or Sunday-Thursday; 8:00 AM-4:30 PM
• Mandatory overtime during peak seasons.

• Experience in receiving and material handling
• Experience operating pallet jack, forklift, and other industrial vehicles preferred
• Ability to work independently as well as in a team environment 
• Moves equipment weighing up to 50 pounds

• Load and unload products from delivery trucks safely and efficiently
• Sort packages by location and zip code for accurate routing
• Maintain a clean and organized work environment
• Follow all safety protocols and company procedures

• Steel toe boots are required for safety
• Ability to lift, move, and handle packages of various sizes and weights
• Strong attention to detail and organizational skills
• Dependable with a strong work ethic

• Early morning shift starting at 6:00 AM
• Approximately 4–5 hours per day
• Hourly rate: $15.50

• Operate and monitor machines
• Follow Standard Operating Procedures (SOPs) and GMP to maintain consistency and safety
• Collaborate with team members to meet production targets and maintain quality standards

• Lift and carry weights between 25–50 lbs regularly
• Stand and walk on concrete floors throughout the shift
• Perform frequent bending, twisting, and lifting tasks

• Hardworking and reliable with a strong work ethic
• A true team player who communicates well and supports others
• Willingness to work overtime when needed to meet production demands

• Be part of a supportive and fast-growing production team
• Gain experience in a thriving food manufacturing environment
• Competitive pay and benefits available

• Competitive Pay: Earn $17.50 per hour, recognizing your valuable contribution.
• Flexible Schedule Options: Choose the shift that best fits your availability for these immediate opportunities:
  • 12:00 PM - 6:00 PM
  • 4:00 PM - 10:30 PM
  • 10:00 AM - 10:30 PM
• Active Work Environment: Stay active and engaged in a busy, team-oriented setting.
• Immediate Start: Opportunities available for quick placement.

• Safely and efficiently load and unload packages from trucks and conveyors.
• Accurately sort packages by destination and utilize scanning equipment to track items.
• Move packages within the warehouse, ensuring proper placement and organization.
• Adhere to all safety protocols and maintain a clean, organized work area.
• Work effectively with team members to meet daily production goals and deadlines.

• Ability to lift and move packages weighing up to 50 lbs. regularly.
• A keen eye for accuracy in sorting and scanning.
• Ability to work effectively in a team environment.
• Strong commitment to punctuality and consistent attendance.
• Ability to thrive in a fast-paced and dynamic warehouse setting.

• Process customer orders daily to meet their expectations
• Work in one or more process paths; receiving, picking, packing, or shipping.
• Package and label shipments according to standard operating procedures and complete
• Documentation requirements for hazardous materials
• Help make sure inventory is stored properly
   

• High school diploma or equivalent required.
• 2+ years of general warehouse experience
• Experience with powered industrial trucks (order pickers)
• Experience handling hazardous materials (chemicals) is a plus
• Experience with computers and scanning equipment is a plus
   

• Must be able to stand and move about the warehouse for significant periods (involving walking, stooping, bending, and reaching required)
• Ability to maintain a high level of accuracy and attention to detail
• Desire to work as part of a team, but also able to work independently and solve problems quickly.
• Must be able to read and write in English

• Process customer orders daily to meet their expectations
• Work in one or more process paths: receiving, picking, packing, or shipping.
• Package and label shipments according to standard operating procedures and complete
• Documentation requirements for hazardous materials
• Help make sure inventory is stored properly
   

• High school diploma or equivalent required.
• 2+ years of general warehouse experience
• Experience with powered industrial trucks (order pickers)
• Experience handling hazardous materials (chemicals) is a plus
• Experience with computers and scanning equipment is a plus
   

• Must be able to stand and move about the warehouse for significant periods (involving walking, stooping, bending, and reaching required)
• Ability to maintain a high level of accuracy and attention to detail
• Desire to work as part of a team, but also able to work independently and solve problems quickly.
• Must be able to read and write in English

• Part Preparation: Clean, hand-sand, and solvent-clean parts before painting.
• Shop Maintenance: Maintain a clean paint shop and ensure tools and equipment are in good condition.
• Safety Compliance: Follow all safety protocols and wear required PPE.

• High School Diploma or equivalent.
• Ability to follow instructions and work in a fast-paced environment.
• Comfortable working with paints, solvents, and hazardous materials.
• Ability to lift, sand, and stand for extended periods.

• Maintain equipment and facilities to meet safety and quality standards.
• Use cleaning systems such as CIP (Clean-in-Place) and COP (Clean-Out-of-Place), ensuring safe and correct use of chemicals.
• Disassemble and reassemble equipment as part of the cleaning process — gaining hands-on mechanical knowledge.
• Perform inspections and testing to confirm all areas meet requirements before production starts.
• Follow Good Manufacturing Practices (GMPs) and comply with food safety and OSHA regulations.
• Assist with safety checks, pest control, and team training.
• Accurately document tasks and maintain compliance records.
• Adapt to different environments — cold, hot, wet, dry, and noisy — with the support of your team.

• High school diploma or equivalent (preferred, not required).
• Experience in food production, manufacturing, or a similar environment (1+ year preferred).
• Comfortable with physical work and hands-on tasks.
• Detail-oriented, dependable, and committed to safety.
• Able to follow directions, ask questions, and work independently when needed.
• Basic math, reading, and writing skills for forms and instructions.
• Familiar with safe handling of chemicals, or willing to learn.
• A strong team player who enjoys contributing to a bigger purpose.

• Be part of a team that helps keep food safe for everyone.
• Opportunities for training and career growth.
• Year-round job stability in an essential industry.
• Work that truly makes an impact every single day.

• Operate multiple manufacturing machines, ensuring smooth and efficient production.
• Set up and pre-run equipment at the start of each shift to guarantee proper startup and reduce downtime.
• Monitor and control production variables, including line speeds, batch formulas, and output rates.
• Start and stop equipment as needed, maintaining a strong focus on safety, product quality, and consistency.
• Perform routine quality checks to ensure products meet production standards.
• Complete and maintain all required documentation, including downtime records, HACCP logs, and other compliance paperwork, using systems such as SAP and following established SOPs.
• Follow company policies and safety protocols, contributing to a safe and respectful workplace.
• Act as a role model for professional conduct and support team alignment with the company’s mission, values, and code of ethics.
• When applicable, guide or support team members in their responsibilities and performance.

• Experience: 1–2 years in manufacturing or machine operation.
• Skills & Abilities:
  • Proficient in operating multiple machines with minimal supervision.
  • Strong attention to detail, meeting production specifications with accuracy.
  • Excellent communication and reasoning skills to share and relay information effectively across all levels of the organization.

• Lead and develop a high-performing maintenance team
• Manage preventive and predictive maintenance programs for production equipment (CNCs, welders, robotics, etc.)
• Ensure compliance with OSHA and local codes; oversee safety protocols and investigations
• Read and interpret technical manuals, wiring diagrams, and engineering drawings
• Coordinate with contractors, facility services, and regulatory agencies
• Maintain facility operating licenses and submit compliance documentation
• Monitor maintenance schedules, budgets, and performance metrics
• Drive continuous improvement and lean manufacturing initiatives

• Associate’s degree or technical certification required, bachelor’s preferred
• 5+ years of maintenance experience in a manufacturing setting
• 2+ years of team leadership or supervisory experience
• Strong mechanical aptitude and equipment troubleshooting skills
• Proficiency with Microsoft Office and maintenance tracking tools

• Typical hours: 6:00/7:00 AM – 4:30 PM, Monday through Friday
• On-call role: Must be available to respond to facility alarms during non-working hours and report onsite if needed
• Shop floor environment with exposure to machinery, noise, and electrical systems
• Requires occasional lifting (up to 50 lbs.) and physical presence in operational area

• Health, dental, vision insurance
• 401(k) with match
• Paid time off and holidays
• Training and development opportunities

• Manually load and unload parts and components using established procedures
• Operate, monitor, and maintain production equipment, including filling chemicals
• Use a low-powered microscope for limited inspection tasks
• Maintain cleanroom standards and proper handling procedures for delicate glass products
• Perform data entry and basic PC functions as part of production documentation
• Follow detailed work instructions and standard operating procedures (SOPs)
• Adhere to safety protocols and maintain a clean, organized workspace
• Participate in team meetings and support continuous improvement efforts

• High School Diploma or GED with 4+ years of relevant experience
• Strong manual dexterity and hand/eye coordination
• Close attention to detail and ability to consistently produce high-quality work
• Basic PC literacy, including Microsoft Office (Outlook, Excel, Word)
• Ability to work both independently and within a team environment
• Willingness to work in a full cleanroom suit and perform repetitive tasks
• Able to sit or stand for extended periods and lift arms to shoulder height repeatedly

• Associate’s Degree or post-secondary certification with 0–2 years of related experience
• Experience handling small, delicate components such as microchips or glass parts
• Background in electronics or electro-mechanical assembly

• Strong communication and collaboration skills
• Dependable and self-motivated
• Patient, with the ability to make quick quality decisions
• Team-player mindset with a positive attitude

• 1st shift, cleanroom environment
• Full cleanroom attire (bunny suit) required at all times
• Team size: Approximately 16 members
• Repetitive, manual work with a focus on precision and cleanliness

• Location: Green Castle, PA
• Schedule: 1st shift (8:00 AM - 5:00 PM) or 2nd shift (10:30 AM - 7:00 PM)
• Pay: 1st shift - $18.50 per hour, 2nd shift - $20.35 per hour

• Perform warehouse tasks such as picking, packing, sorting, and storage
• Ensure accurate processing and shipment of materials
• Receive and verify materials to maintain quality and accuracy
• Work in a warehouse environment with varying temperatures

• Previous warehouse or manufacturing experience
• Strong organizational and communication skills
• Ability to work in a fast-paced environment